1001 Premium Acrylic Interior Wall Paint
Our flagship product is available in multiple shades and pack sizes.
|
Description : |
1001 Premium Acrylic Interior Wall Paint is a WASHABLE water based paint of soft butter like consistency made from excellent quality emulsions and light fast pigments. |
|
Thinning and Clean Up: |
Add a little water to the material, stir thoroughly till a smooth creamy consistency results.
Add some more water. Total water added should not be more than half the weight of the paint. |
|
Uses : |
Ideal coating for interior decoration of houses, plastered walls, brick work, concrete and asbestos surfaces etc. |
|
Finish : |
Smooth matt finish. |
|
Application : |
By brush/Roller/Spray.
Surfaces should be free from efflorescence. Old paint/ Lime should be removed by scraping or rubbing down and the surface should be free from loose and flaking materials. |
| Pack sizes: | 30 kg, 20 kg, 10 kg, 5 kg, 2 kg, 1 kg |
|
Drying Time : |
Surface dry 1 hour.
Recoatable after 8-12 hours. Normally two coats are enough. |
|
Colour Range : |
As per 1001 shade card. |
| Shelf Life: | 36 months |
| Characteristics: | Eco-Friendly paint with very good finish at economical prices.
Odour free. Non-inflammable. |
|
Undercoats: |
Use Gloss Water Thinnable Wall Primer |
Direction for use:
Curing:
Surface to be painted must be allowed to cure completely
It is recommended to allow 28 days as the curing time for few masonry surfaces.
Cleaning:
Surface should be free from any loose paint, dust or grease.
Growth of fungus, Algae or moss should be removed by wire brushing and water.
In case area has excessive dampness, use Glossy Crete is limit further dampness.
Filling of cracks:
In case of dents and holes, use Glossy Homecare Acrylic Wall Putty; Glossy Homecare Powder Putty with white cement and fine sand in the ratio of 1:3.
Application:
Sanding: Sand the surface thoroughly with sand paper of 180 grade and wipe clean.
Priming: Apply one coat of water based Glossy Cement Primer (For repainting) or Solvent based Cement primer (For New Surface) & let it dry
Putty: Apply Glossy Acrylic Wall Putty/ Glossy Homecare Powder Putty with a pully knife and let it dry.
Priming: Apply second coat of Glossy Cement Primer water based or solvent based & let it dry.
Sanding: Sand the surface again to achieve desired smoothness with sand paper of 320 grade and wipe clean
Top Coat: Apply first coat of Glossy Paints Premium Acrylic Interior Wall Paint after diluting it with required amount of potable water (Not more than 30%).
Let it dry for 3-4 hours
Apply second coat of Glossy Paints Premium Acrylic Interior Wall Paints after diluting it with required amount of potable water & straining and let it dry for 3-4 hours
*Recoat period suggested for 25°C and 50% relative humidity. These may vary under different weather conditions.
- In case of base paint, Colourants cost extra.
Lead Content does not exceed 90 parts per million
Shelf Life: 36 months from packaging
Imitation of graphics is a punishable offence
Pack Sizes: 1 kg, 2 kg, 5 kg, 10 kg, 20 kg, 30 kg