1001 C.R. Based Fire Retardant Paints (Solvent Based)
TECHNICAL DATA SHEET
1001 Fire Retardant Paints ST are based on high quality of intumescence pigments and, chemically inert extenders properly blended with Isoprene based binders.
It can be applied either on Asbestos, Wood, or Mild Steel.
It has the following features-
| 1 | Finish: | Smooth, Uniform and Semi- Glossy |
| 2 | Supply Viscosity at 30°C with Ford Cup B4 : | 60 to 120 seconds. |
| 3 | Colours: | White, Grey, Light Pink or Any other shade on order |
| 4 | Drying Time: | (a) Surface dry: 15 to 30 Minutes (b) Hard Dry: 3 to 4 Hours |
| 5 | Covering capacity per liter per coat : | 8 to 10 Sq Meter per litre per coat (25 microns DFT) |
| 6 | Mode of application : | By Spray Or By brush |
| 7 | Thinner for adjustment : | Glossy’s Reducer OCR 2T |
| 8 | Fire Retardant Test: | It withstands the temperature up to 500 to 550°C. |
| 9 | Shelf Life : | 12 Months under Sealed condition from the date of manufacturing. |
| 10 | Number of Coats: | Minimum two coat after interval of 2 to 4 Hours |
| 11 | Pack sizes: | 20 Litres , 4 Litres , 1 Litre |
Note: For Fire Retardant Paint ST for fibre glass wool and plastic specifications are different.
DISCLAIMER
Information contained within this page is based on information believed to be reliable at the end of its preparation. The Company will not be liable for loss or damage howsoever caused including liability of negligence which may be suffered by the user of the data contained herein.
It is the user’s responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use.
No guarantee of results is implied since conditions of use are beyond our control.