Technical Data Sheet
1001 CR Based Fire Retardant Paints ST – Code: OCR2SG
(Solvent Based Intumescent Coatings)
1001 CR Based Fire Retardant Paints ST are based on high quality of intumescence pigments and chemically inert extenders properly blended with isoprene based binders. It can be applied either on asbestos, wood, or mild steel.
It has the following features-
1. Finish : Smooth, Uniform and Egg Shell to Semi- Glossy
2. Supply Viscosity at 30°C with Ford Cup B4 : 60 to 90 seconds
3. Colours: White, Grey, Light Pink or Any other shade on order
4. Drying Time:
(a) Surface dry: 15 to 30 Minutes at 30ºC Temperature
(b) Hard Dry: 3 to 4 Hours
5. Covering Capacity per Liter per Coat : 10-12 sq metres per Litre per coat (25 Microns DFT to 30 Microns DFT)
6. Mode of Application : By spray or by brush (for better results use spray only)
7. Thinner for Adjustment : 10% 1001 CR Reducer to be added for brushing while 25% is to be added for spraying
8. Fire Retardant Test : Passes the test for 30 minutes under Fire Blower
9. Flash Point (Closed Abel’s) Apparatus : Above 250C
10. Shelf Life : Twelve months under sealed condition from the date of manufacturing
11. Number of Coats: Minimum two coats after an interval of 2 to 4 Hours
12. Under Coat : 1001 CR Based Primer ST
13. Pack Sizes : 20 Litres, 4 Litres, 1 Litre
Technical Data Sheet
1001 CR Based Fire Retardant Primer White ST – Code: OCR2SGP
(Solvent Based Intumescent Coatings)
1001 CR Based Fire Retardant Coatings and Primers ST are based on high quality of intumescence pigments and, chemically inert extenders properly blended with isoprene based binders. It can be applied either on asbestos, wood, or mild steel. This serves as an undercoat to 1001 CR Based Fire Retardant Paints ST – Code: OCR2SG.
It has the following features-
1. Finish : Smooth, Uniform and Egg Shell to Semi- Glossy
2. Supply Viscosity at 30°C with Ford Cup B4 : 60 to 90 seconds
3. Colour : White
4. Drying Time:
(a) Surface dry: 15 to 30 Minutes at 30ºC Temperature
(b) Hard Dry: 3 to 4 Hours
5. Covering Capacity per Liter per Coat : 8-10 sq metres per Litre per coat (25 Microns DFT to 30 Microns DFT)
6. Mode of Application : By spray or by brush (for better results use spray only)
7. Thinner for Adjustment : 10% 1001 CR Reducer to be added for brushing while 25% is to be added for spraying
8. Fire Retardant Test : Passes the test for 30 minutes under Fire Blower with suitable overcoats of 1001 Solvent Based Intumescent Coatings
9. Flash Point (Closed Abel’s) Apparatus : Above 250C
10. Shelf Life : Twelve months under sealed conditions from the date of manufacturing
11. Number of Coats of Primer: Minimum two coats after an interval of 2 to 4 hours
12. Over Coats : 1001 CR Based Fire Retardant Paints ST – Code: OCR2SG (Minimum two coats)
13. Pack Sizes : 20 Litres, 4 Litres, 1 Litre
DISCLAIMER
Information contained within this technical data sheet is based on information believed to be reliable at the end of its preparation. The company will not be liable for loss or damage howsoever caused including liability of negligence which may be suffered by the user of the data contained herein.
It is the user’s responsibility to conduct all necessary tests to confirm the suitability of any product or system for their intended use. No guarantee of results is implied since conditions of use are beyond our control.
Intended Users/ Professional Use Only: This product is intended for professional use only by individuals with appropriate training and expertise in the application of this type of coating. Use by individuals who are not professionally qualified in this type of coating is not recommended.
Information Purposes Only Disclaimer: The information, and, in particular, the recommendations relating to the application and end-use of Glossy 1001 Paints products are given in good faith based on Glossy 1001 Paint’s current knowledge and experience of the products when properly stored, handled and applied under normal conditions.
Liability Disclaimer: The manufacturer/ distributor disclaims any liability for damages or injuries arising from the use of this product by individuals who are not professionally qualified in its application.
Warranty / Guarantee Disclaimer: In practise, the differences in materials, substrates and actual site conditions are such that no warranty or guarantee in respect of merchantability or of fitness for a particular purpose, nor any liability out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered.
Intellectual Property Notice: The proprietary rights of third parties must be observed.
Order Terms: All orders are subject to our current terms of sale and delivery.
Technical Data Sheet Reference: Users should always refer to the most recent issue of the Technical Data Sheet for the product concerned, copies of which will be supplied on request.